camry 2006 trunk release

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120934
Printed Date: May 07, 2024 at 8:42 PM

Topic: camry 2006 trunk release

Posted By: mike08401
Subject: camry 2006 trunk release
Date Posted: March 24, 2010 at 4:40 PM

need help on trunk release on 06 camry
Had wire white and red from viper 5702 to trunk release pin WHITE/ blue on car connect with relay as viper instruction but not thing happen but blow fuse. any idea what did i do wrong?? what extra wire or part needed??
Many thanks

Replies:

Posted By: jeremytravis
Date Posted: March 24, 2010 at 4:56 PM

Well how did you wire up the relay?

-------------
**ADVANCED MECP CERTIFIED

Posted By: tedmond
Date Posted: March 24, 2010 at 6:24 PM

you will need to 5wire this wire with a relay.

85 - trunk output from unit
86 - constant 12v
87 - constant 12v
87a - trunk release wire switch side
30 - trunk release wire motor side

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: mike08401
Date Posted: March 24, 2010 at 8:48 PM

Oh my bad i forgot to post my wire connection
relay 85 to WHITE/ red from viper
86&87 to +12V
30 to WHITE/ blue car BECU

I saw the diagram for 5wire but not sure where are other wire come from the car i mean 87a and 30 to what's wire of the car

when you said 30-trunk release motor side what is it color? and where's it location?
87a to switch side color and location???

Many Thanks

Posted By: kreg357
Date Posted: March 24, 2010 at 9:00 PM

Cut the WHITE/ Blue trunk wire at a convenient location. Most installers grab the wire in the drivers kick panel. The side of the wire you just cut going to trunk is connected to relay pin 30. The side going to the switch connects to relay pin 87A.

-------------
Soldering is fun!

Posted By: kreg357
Date Posted: March 24, 2010 at 9:08 PM

The WHITE/ Blue trunk release wire can (also) be found in the Drivers Kick Panel in a White 12 Pin plug.

-------------
Soldering is fun!

Posted By: KarTuneMan
Date Posted: March 25, 2010 at 7:31 AM

Pulse the trunk key sence wire (diode isolate) at the same time, and you wont need to disarm the factory security prior to popping the trunk.

Its the GREEN / WHITE just below the trunk blue/white.

-------------

Posted By: mike08401
Date Posted: March 26, 2010 at 8:34 PM

Did not try yet but thank you all

Posted By: mike08401
Date Posted: April 12, 2010 at 9:25 AM

Tried but nothing happen...Just kept blown 30amp fuse