setting the time on a viper 5901 remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120991
Printed Date: May 18, 2025 at 2:10 PM

Topic: setting the time on a viper 5901 remote

Posted By: tequila2369
Subject: setting the time on a viper 5901 remote
Date Posted: March 26, 2010 at 3:02 PM

I am unsure of how to set the time on my new viper remote to the right time? can anyone help me?

Replies:

Posted By: jeremytravis
Date Posted: March 28, 2010 at 1:18 AM

Well it's funny I get this alot, the user guide for the Viper 5901 doesn't really say, so here is the user guide for the Python 991 to set the clock read pages 35-38 its at the bottom of page 38, the Python 991 uses the same remote programming steps.

https://www.directeddealers.com/manuals/OG/Python/G5702P%202008-08web_small.pdf

-------------
**ADVANCED MECP CERTIFIED

Posted By: grunnsetning
Date Posted: July 13, 2010 at 9:02 AM

The guide says to first press f to adjust it. When I hit, or even hold f, all it does is go to level 1.
Any tips?

Posted By: grunnsetning
Date Posted: July 13, 2010 at 9:39 AM

Nevermind, I think I may have figured out what I was doing wrong.

Posted By: Mark Mizenko
Date Posted: July 13, 2010 at 10:18 AM

HOLD the F button, it will display CAR 1.... KEEP HOLDING IT.... it will display "setup remote", use the AUX button to go to CLOCK, press F once, then choose, HOUR, OR MIN, press F to select then adjust it with the AUX button, press F to set that time.

Print Page | Close Window