dei 530t problems motor grinding
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121106
Printed Date: July 07, 2025 at 4:56 AM
Topic: dei 530t problems motor grinding
Posted By: scott1587
Subject: dei 530t problems motor grinding
Date Posted: March 31, 2010 at 5:07 PM
Ok so i have a 530T in my 98 dodge ram..Its been installed and working fine for a long time. For some reason the module has stoped detecting the resistance or somthing on my driver window. When i push the 1-touch to roll the window up, everything seems fine but once the window is completly up, the module does not click off. I can hear the motor grind for a second and then the module will click off. The passanger window still works fine. I can operate 1-touch for the passenger side from my driver side and i can hear the module click off after it is completly down or up. (Unlike the driver side) What could be the problem?? Loose wire? PLEASE HELP!!
-------------
Scott
Replies:
Posted By: KPierson
Date Posted: March 31, 2010 at 6:28 PM
What happens if you only use the switch (ie disconnect the module). I would guess that there is something wrong with your power window and not the module. Have you done any work to the drivers side window lately?
-------------
Kevin Pierson
|