clifford alarm, trigger wires

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121144
Printed Date: May 21, 2024 at 12:15 AM

Topic: clifford alarm, trigger wires

Posted By: markmills2000uk
Subject: clifford alarm, trigger wires
Date Posted: November 08, 2008 at 11:27 AM

im in the process of wiring in a clifford callguard onto my avantguard 5.5 and i need to know which wires coming of the sensors are the trigger wires,the tilt and glass sensor have blue,red and black wires and the proximity sensor has red,black and WHITE/ black

im assuming the blue wires and the WHITE/ black wires is that correct

Replies:

Posted By: ckeeler
Date Posted: November 08, 2008 at 11:42 AM

blue and WHITE/ black

Posted By: howie ll
Date Posted: November 10, 2008 at 2:35 AM

Is that a Clifford NOT DEI dual zone prox? If so it probably won't work with the Call Guard because it's digital sending data not a voltage, check with Armour Auto and ask for Carl, that's DEI's UK tech. these days. Use the brown siren output or secondary siren output relay converted to feed pos. to the Call Guard it's far simpler. Also watch the aerial on the Call Guard, very fragile.

Print Page | Close Window