how to master reset audiovox aps-785
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12116
Printed Date: September 07, 2025 at 7:06 AM
Topic: how to master reset audiovox aps-785
Posted By: legend9
Subject: how to master reset audiovox aps-785
Date Posted: April 12, 2003 at 1:46 PM
Does anyone knows how to reset this to all fact. default values? I messed around with some valet features, and cannot remember what I did. Also, the doors only unlock if I pressed unlock twice, so its aggravating.
Replies:
Posted By: Chris Luongo
Date Posted: April 12, 2003 at 2:51 PM
As far as I know, there is no way to reset everything to default.
So, you'll probably have to just run through each feature one by one, and re-program everything the way you want it.
It really should only take about five minutes, and the programming steps aren't that hard. If you find the instructions confusing (which they kinda are), let me know, and I'll try to clarify.
If you have to press unlock twice to get the doors open, that sounds like an install issue. What kind of car is it?
The three-pin lock harness goes like this:
red: lock
green: first unlock
RED / black: second unlock.
I'll bet you're using the RED / black as your unlock wire, instead of the green.
Posted By: legend9
Date Posted: April 12, 2003 at 5:09 PM
Hey Chris, Much thanks for the needed info. Yes, you were right about me doing the wiring incorrect. Thanks for pointing that out. The car now works like a charm. Audiovox is a good quality built alarm, compare to the earlier ones I had: vampire...magiccar....brandless namez.....
|