keysense wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121161
Printed Date: May 15, 2025 at 8:10 AM
Topic: keysense wire
Posted By: lynnboy021
Subject: keysense wire
Date Posted: April 04, 2010 at 10:16 PM
i keep seeing on fourms about keysense wire, whats it for and what wire from the remote starter you use to hook to the keysense? i have hooked up some starters be4 but i never see "hook this wire to the keysense wire".
Replies:
Posted By: x1le
Date Posted: April 04, 2010 at 10:25 PM
sometimes keysense is needed for the vehicle to be started, also sometimes can be used to disarm the factory alarm. A status wire is usually used to power it (just verify the polarity)
Posted By: tedmond
Date Posted: April 04, 2010 at 10:38 PM
keysense is often used to disarm the factory alarm, and at times some bypasses require a keysense input so the computer on the car wont read 2 keys at one time causing problems.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|