viper 5901 on a chevy equinox 200

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121308
Printed Date: July 13, 2025 at 12:41 AM

Topic: viper 5901 on a chevy equinox 200

Posted By: ivansd619
Subject: viper 5901 on a chevy equinox 200
Date Posted: April 12, 2010 at 6:50 PM

I need alot of help on installing the viper 5901 on my 2006 chevy equinox

i dont have any bypass systems yet so i need to start their anyone install one on this type of car before that might be able to help from start to finish?

also since i need a bypass to start the car what if i leave the bypass out and just use the alarm will that work thanks

Replies:

Posted By: blanx218
Date Posted: April 12, 2010 at 11:17 PM

you can use an XK06 from xpresskit or ads al-ca from idatalink as your bypass. both work great and are easy to install. if you arent going to use the remote start portion of your system then you could be wasting some cash since an alarm only is much cheaper. but if you wanted to you could use just the alarm portion. most of your wire connections will be at the BCM which is located under the radio behind the heater controls.

Posted By: ivansd619
Date Posted: April 13, 2010 at 5:17 PM

well i just recently purchased the pljx bypass

does that work well ?

Posted By: ivansd619
Date Posted: April 15, 2010 at 11:11 PM

i need help i bought a viper alarm and it was asking to ground out from remote start

anyone help?

https://alarmtek.tripod.com/PLJX_MODULE.pdf

second page by the way i have a viper 5901 what wire is the bypass talking about that i need to plug into the viper

Print Page | Close Window