RS3 with Proximity 4 Sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12131
Printed Date: September 09, 2025 at 12:07 PM

Topic: RS3 with Proximity 4 Sensor

Posted By: pheatra
Subject: RS3 with Proximity 4 Sensor
Date Posted: April 13, 2003 at 1:09 AM

I just installed a clifford rs3 responder in my car. I wanna know if I can use a Clifford proximity 4 sensor and if so how would i wire it.

Replies:

Posted By: street tuner 9
Date Posted: April 13, 2003 at 4:56 PM

This site has some info:

https://members.cox.net/blownls1/sensor/sensor.htm

Posted By: x6369x
Date Posted: April 14, 2003 at 8:15 AM

I would assume the Clifford sensor would work, but I've never used one.

Check out my post when using a Clifford RS3 with a DEI 508D (dual stage proximity sensor).
https://www.the12volt.com/installbay/forum_posts.asp?tid=12100&PN=1

-------------
Friends Don't Let Friends Bump Stock.

Print Page | Close Window