viper 5701 clutch bypass relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121341
Printed Date: May 14, 2025 at 10:58 PM

Topic: viper 5701 clutch bypass relay

Posted By: ksadam
Subject: viper 5701 clutch bypass relay
Date Posted: April 14, 2010 at 1:37 PM

Hey guys I'm sure this topic has been beaten to death posted_image

I'm currently installing a Viper 5701 in my 1996 Honda Civic EX w/manual trans. I have the relay but my only question is where is the wire that connects to 85?

85:ground when running OR clutch activation from RS
86:starter output from RS(purple on the 5701)
87:ground
30:blue/black wire at clutch
87a:no connection

thanks in advance guys.

Replies:

Posted By: KPierson
Date Posted: April 14, 2010 at 3:15 PM

I would connect it to the ground when running wire from the alarm. Also referred to as a status output.

-------------
Kevin Pierson

Posted By: ksadam
Date Posted: April 14, 2010 at 10:58 PM

thanks for the help man, much appreciated.

Print Page | Close Window