lock wire on 2010 tundra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121358
Printed Date: September 10, 2025 at 3:04 PM

Topic: lock wire on 2010 tundra

Posted By: kid_rocker30
Subject: lock wire on 2010 tundra
Date Posted: April 15, 2010 at 1:48 PM

I have a 2010 tundra that i am installing an alarm (automate AM5) the vehicle does not have RKE but does have power locks. My problem is that i am looking for the lock wire on the truck that i need to use, the alarm uses a ground signal to activate lock/unlock feature of vehicle. Any help locating the lock wire that i need to use would be great help.

-------------
What About It

Replies:

Posted By: kreg357
Date Posted: April 15, 2010 at 2:16 PM

The Lock wire should be a White (-) ( Type B ) wire in a Blue 17 pin plug in the Drivers Kick Panel ( Pin 7 ). The UnLock wire is Red at Pin 6 in the same plug. Of course, always test and verify with a DMM....

-------------
Soldering is fun!

Posted By: kid_rocker30
Date Posted: April 15, 2010 at 3:09 PM

Perfect! Thanks a Ton! Thats exactly what i needed, Thanks.

-------------
What About It

Print Page | Close Window