02 kia viper 5902 dei 530t
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121365
Printed Date: April 28, 2024 at 11:16 PM
Topic: 02 kia viper 5902 dei 530t
Posted By: sneakycyber
Subject: 02 kia viper 5902 dei 530t
Date Posted: April 15, 2010 at 10:57 PM
The problem I am having is when Triggering the 530T via channel one on the 5902 the windows usually roll all the way down instead of venting. The 5902 is set to Validity or Pulsed output and I have tried using a relay but it still pulses too long. The 530 T is set to max resistance I think some of the windows may be out of alignment. Any way to adjust the length of the pulsed output on the 5902 or the input of the 530T
-------------
Replies:
Posted By: howie ll
Date Posted: April 16, 2010 at 1:43 AM
Have you tried grounding that vent wire for a second or less to test that that's actually the problem?
Posted By: sneakycyber
Date Posted: May 08, 2010 at 10:43 AM
sorry for the late response got busy with finals and all. Yes I grounded the wire for a less then a second manually and it vented fine (i have 2 units for all 4 windows both act the same) but hooked to the alarm they sometimes roll down all the way on the first try its a crap shoot.
-------------
Posted By: howie ll
Date Posted: May 12, 2010 at 5:27 AM
Try one of the other aux channels that doesn't have a validity output?
Posted By: sneakycyber
Date Posted: May 12, 2010 at 5:35 AM
bleh! Why didn't I think of that I will try the trunk or the other channels today if the weather cooperates.
-------------
Posted By: howie ll
Date Posted: May 12, 2010 at 6:54 AM
Not the RED / white trunk, it's a validity output, try testing one of the other aux outputs, set to pulse.
Posted By: sneakycyber
Date Posted: May 12, 2010 at 10:19 AM
The weather didn't cooperate today. However according to the programming section of the install manual the options for AUX 1-4 are Validity, latch, latch reset/ign, with different linking options on each channel. Don't see a pulsed.. but according to DEI validity is pulsed. *scratches head*
-------------
Posted By: howie ll
Date Posted: May 12, 2010 at 12:25 PM
Hate that bloody validity, (original) Clifford and I believe Compustar are INSTANT!
Posted By: blanx218
Date Posted: May 12, 2010 at 2:20 PM
Validity is how long the button is pressed on the transmitter. you can set it to be a timed output but need a bitwriter to change the timed output from 30 seconds to 1 second. that might work for you
Posted By: howie ll
Date Posted: May 12, 2010 at 5:10 PM
Yes that's fine, I thought of that but what if you want to completely open the windows?
Posted By: t&t tech
Date Posted: May 12, 2010 at 5:31 PM
The RED / white works for me! Vent and total close!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
|