adding a door lock/unlock switch.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121382
Printed Date: May 11, 2025 at 7:12 AM

Topic: adding a door lock/unlock switch.

Posted By: ajan246
Subject: adding a door lock/unlock switch.
Date Posted: April 16, 2010 at 7:39 PM

I have a 97 nissan Hardbody. I just finished the install of a keyless/remote start. I went and bought a momentary on-off-on switch, so that I can lock/unlock my doors from inside the car. Here is my setup with the actuators and relays.

posted_image

My question is how do i wire this switch up? What legs of the relay go to the switch and can it even be done?

thanks in advance,
ajan246

Replies:

Posted By: KPierson
Date Posted: April 16, 2010 at 7:51 PM

Wire the switch legs to the (-) inputs of the relay.

-------------
Kevin Pierson

Posted By: ajan246
Date Posted: April 16, 2010 at 8:10 PM

so your saying the pin 85 wires. green and blue bring those to the switch?

Posted By: t&t tech
Date Posted: April 16, 2010 at 9:28 PM

Yes carry those connections to the switch and the common terminal must be ground!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Print Page | Close Window