06 dodge ram remote start problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121447
Printed Date: May 13, 2025 at 12:11 AM

Topic: 06 dodge ram remote start problems

Posted By: desh187
Subject: 06 dodge ram remote start problems
Date Posted: April 20, 2010 at 10:24 PM

Installed a Python 991 alarm/auto start with EVO CHR(2)(by Fortin)Bypass module on a 2006 Ram Diesel.Iam not too familiar with DEI products.
Bypass programmed fine but when remote start is used,the security light on the dash stays flashing even after the ignition key is used.Fortin tech support told me to try a few things but no luck.
Everything is fine if key is used to start the truck.
The next thing is stepping on the brakes doesnt shut the auto start on one push,takes 3 or 4 pushes to shut it off.
Same if i disconnect brake wire and apply 12 volts.
Any feed back will be much appreciated.

Replies:

Posted By: Velocity Motors
Date Posted: April 21, 2010 at 7:04 AM

What version firmware do you have on the EVO-CHR ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: pbellouny
Date Posted: April 22, 2010 at 7:37 PM

the brake thng could be caused if u used the blue white on the brake not the brown

Posted By: desh187
Date Posted: April 23, 2010 at 2:03 AM

I flashed it to the current 2.03 version.The security light is okay now after programming the bypass like 4 times.The other issue is that at times when i put the truck in reverse and once in drive,the horn honks once like when you lock the door with the remotes.I have noticed that it has honked when the gear selector display on the instrument panel does not show the box around the selecton it is in.
The truck is not with me at this time but when i get it back,i may try hard wiring the door locks instead of the bypass module.

Posted By: desh187
Date Posted: April 23, 2010 at 2:05 AM

Oh and there is no factory alarm on this truck

Posted By: tedmond
Date Posted: April 24, 2010 at 5:44 AM

the 991 might be defective. if youre applying 12v to the brake line shutdown and it takes a few attemps, you should get it replaced.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert