Print Page | Close Window

96 plymouth voyager, power windows

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121513
Printed Date: June 03, 2024 at 4:42 PM


Topic: 96 plymouth voyager, power windows

Posted By: micnic
Subject: 96 plymouth voyager, power windows
Date Posted: April 25, 2010 at 2:46 PM

I have a 96 Plymouth Voyageur mini/van. It was built without power windows. The front doors got very corroded & I replaced them with 2 front doors off of a 1999 Plymouth van. These doors have power windows & power door locks. I have no modules or relays & the body computor is not set up for any power accessories on the 96 van. Can I wire it up (the 96) with just relays? It does not have to look good, just functional. I use it for a winter beater & summer boat mover. I have a Ford Fusion Hybrid, which I don't drive in the winter & I can't tow with. I need a simple schematic, hopefully just using switches & relays. Thanks. B. Farmer.

-------------
J Farmer



Replies:

Posted By: t&t tech
Date Posted: April 25, 2010 at 4:14 PM
Yes you can it do this with just switches and relays!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5




Posted By: t&t tech
Date Posted: April 25, 2010 at 4:17 PM
posted_image


-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5




Posted By: t&t tech
Date Posted: April 25, 2010 at 4:20 PM
The above relay setup would work for all the door locks, and for each window you would need to have the same setup individually! On the diagram where it says to the actuators. these would go to the window motor wires!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5




Posted By: micnic
Date Posted: April 25, 2010 at 7:08 PM

t&t tech: Thanks so much for the prompt response. Now I can see how to wire the circuits. J. Farmer



-------------
J Farmer





Print Page | Close Window