marksman x7 pinout

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121529
Printed Date: June 02, 2024 at 11:55 AM

Topic: marksman x7 pinout

Posted By: lbenson3
Subject: marksman x7 pinout
Date Posted: April 26, 2010 at 12:38 PM

I am trying to install a marksman x7 remote start. The guy i got it from just yanked it out and doesn't have a install manual. After some comparison of other models i have part of the wiring guide. But alot to be assigned still. I have made a markup paint shop of the control box, with what i know, and opening it up and reading the,,,idk,,acronyms,, of the pins. Can someone, a few, compare the attached pdf or jpg and help me decrypt this. I have search everywhere online for a manual to no avail, so the hard way it is. Thank you in advance for your help. If i get this 100% decrypted i will surely share as i know theirs not much online about it. posted_image

Replies:

Posted By: tedmond
Date Posted: April 27, 2010 at 5:36 AM

you might concider just getting a reliable unit or brand named unit.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: howie ll
Date Posted: April 27, 2010 at 6:07 AM

Looks like a knock-off 5901 from the wire colours with no starter cut, not a bad thing. At least it has a tach input.

Posted By: lbenson3
Date Posted: April 27, 2010 at 11:04 AM

tedmond wrote:

you might concider just getting a reliable unit or brand named unit.

I would love to go out and buy a new unit with fresh marked wire, instruction, and manuals. Heck even have someone ELSE mess with the install. Well last one not true im too D.I.Y.. However things are tight, unit was free. If for no other reason reduce, reuse, recycle right.

Posted By: lbenson3
Date Posted: April 27, 2010 at 11:08 AM

howie ll wrote:

Looks like a knock-off 5901 from the wire colors with no starter cut, not a bad thing. At least it has a tach input.

What brand? This manufacture is same for like 5-6 different "Brand" names.

Posted By: howie ll
Date Posted: April 27, 2010 at 11:54 AM

All the brands are now the same except for their only decent product, G5 Clifford.
I'm afraid you're on your own with this unless someone happens to have done one and can tell you what is what. I'll try Mr. Google when I get bored but don't hold your breath. Generally these units are NOT DIY as we well know from some of the stupid questions here.

Posted By: howie ll
Date Posted: April 27, 2010 at 11:57 AM

There don't appear to be any door, trunk or hood trigger inputs, good luck.

Posted By: howie ll
Date Posted: April 27, 2010 at 12:29 PM

Try Googling Magnadyne Marksman

Posted By: tedmond
Date Posted: April 27, 2010 at 4:39 PM

oh darn, howie beat me to it.

https://www.magnadyne.com/index.cfm

i was trying to get back on a pc to post lol. damn finals are killing my day away from the pc.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: lbenson3
Date Posted: April 27, 2010 at 8:20 PM

Been there. I did google it many times and places. Google, yahoo, msn, dogpile, pdf search, etc. but i do have and upate to the diagrahm for those interested. posted_image