727t arm w/door lock switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121560
Printed Date: May 19, 2025 at 1:32 PM

Topic: 727t arm w/door lock switch

Posted By: pbustle
Subject: 727t arm w/door lock switch
Date Posted: April 27, 2010 at 6:01 PM

I installed a Hornet 727t in my 2003 Ford F350. The truck has factory remote keyless. Almost everything works perfectly except I do not understand one thing. It may be working correctly, but I am not sure. When I press the lock switch on the door, With the door open as I am getting out of the car, it arms the alarm. Is this how it is soposed to act? If I unlock with the lock switch, while armed, it does not disarm the alarm. I know this is correct, but it says nothing about this in the book as far as I can find.

Any help with this is greatly appreciated.

Pat Bustle

Replies:

Posted By: tedmond
Date Posted: April 27, 2010 at 8:26 PM

i assume this is an addon unit to work with your oem/factory alarm ?

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: pbustle
Date Posted: April 27, 2010 at 10:36 PM

yes, this is an add on unit. It is a DEI Hornet 727T. I think it is the same as the viper 330v

Posted By: pbustle
Date Posted: April 29, 2010 at 8:43 AM

Can anyone help with this? The issue I am having is that when you press the door lock twice inside the vehicle, it causes the panic feature to go off. This is a bad thing when you are driving down the road and somone bumps the door lock. I can disable the panic feature if neccisary, but dont really want to. Thanks.