2010 rav4 keyless entry wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121579
Printed Date: May 20, 2024 at 10:46 AM

Topic: 2010 rav4 keyless entry wiring

Posted By: pkwun98
Subject: 2010 rav4 keyless entry wiring
Date Posted: April 28, 2010 at 7:42 PM

Can someone provide the wiring locations for the keyless entry buttons?

I want to use the OEM keyless entry buttons as inputs to activate/deactivate an alarm system, the Viper 330V alarm.

I understand these locations are isolated/differnent from the wires for the door lock/unlock switches and key lock/unlock.

Thanks,

Replies:

Posted By: tedmond
Date Posted: April 29, 2010 at 6:39 AM

you can do that.

just program the viper if it can be programmed to disarm on unlock if a puse is received.

take the input leads and connect them to your lock and unlock wires on the car. that way if you use the oem fob, your aftermarket alarm is still functional.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: pkwun98
Date Posted: April 29, 2010 at 1:06 PM

I thought about that initially. But...

There's a problem. When I lock/unlock with the keyless entry buttons, the following wires (and adjacent wires on the 2 plugs) don't generate a (-)pulse:

LOCK Pink On white plug in driver's kickpanel - (This is for key-on-door lock)

UNLOCK Blue (double pulse) On white plug in driver's kickpanel - (This is key-on-door unlock)

So I think the wiring for the keyless entry buttons are isolated from the door cylinder key actions.

Posted By: tedmond
Date Posted: April 29, 2010 at 4:49 PM

you will need to go to the motor wires in the door then.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: Mike M2
Date Posted: April 30, 2010 at 6:45 AM

You need to use the motor wires. The lock and unlock are in the DKP with the wires coming from the door, the defeat wire is in the BCM, top left plug.

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: pkwun98
Date Posted: April 30, 2010 at 11:08 AM

Are the motor wires the same as the door lock and unlock switch wires? I tested these wires also. they generate a pulse with the switches but not with the keyless entry buttons.

Actually I believe I tested all of the wires coming from the driver door in the DKP and didn't find a pulse by pressing the keyless entry buttons.

For the defeat wire, i was planning to use the door unlock switch wire mentioned above. But that was before i realized the keyless entry button wires are isolated/separate from the door lock/unlock switch wires. Can you provide more info on the BCM for the defeat wire and on the motor wires?

Thanks for your responses.