park light output to turn signals

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12169
Printed Date: July 25, 2025 at 7:01 PM

Topic: park light output to turn signals

Posted By: hiluxrunner
Subject: park light output to turn signals
Date Posted: April 13, 2003 at 9:12 PM

Is it possible to use existing parking light output from alarm w/ built in relay and connect it to the wire that signals the hazards so my turn signals will flash instead of my park and brake lights ?? Thanks

Chris

Replies:

Posted By: draasch
Date Posted: April 13, 2003 at 9:14 PM

yes it is. check the hazard wire with a volt meter before you hook any wires up.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: hiluxrunner
Date Posted: April 13, 2003 at 9:22 PM

thanks for the quick response ill check it out tomarrow

thanks
Chris

Print Page | Close Window