autopage c3 rs 665 2w, 2004 trailblazer
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121827
Printed Date: July 07, 2025 at 11:51 AM
Topic: autopage c3 rs 665 2w, 2004 trailblazer
Posted By: nick6685
Subject: autopage c3 rs 665 2w, 2004 trailblazer
Date Posted: May 13, 2010 at 10:15 PM
I hvae a 2004 Chevy Trailblazer that I'm going to install the "Autopage C3-RS-665-2W" on. I have done 2 alarms in the past so I'm pretty new still. I was told to buy a GMDLBP in order to start and lock/unlock. Does anyone have an installation manual on this alarm or how to hook it up?
Replies:
Posted By: kreg357
Date Posted: May 14, 2010 at 5:35 AM
Not sure if you are looking for the install gude for the Autopage unit or the Directed GMDLBP bypass. Here is a link to the Directed GMDLBP : https://www.xpresskit.com/product.aspx?productid=148 Just scroll down to Manual Downloads tab and select & download the install guide. ------------- Soldering is fun!
Posted By: nick6685
Date Posted: May 14, 2010 at 7:55 PM
I was looking for the Autopage C3-RS-665-2W installation manual.
Posted By: nick6685
Date Posted: May 16, 2010 at 9:03 PM
I was looking for the Autopage C3-RS-665-2W installation manual. I am installing it on a 2004 Chevy Trailblazer.
Posted By: nick6685
Date Posted: May 24, 2010 at 10:26 PM
I have a 2004 Chevy trailblazer. I installed an Autopage C3rs6652w, but I could not get the remote start to work. I installed the GMDL-BP unit for and the locks and everything else works fine. The weird thing is that even if I turn the key to the "on" position and give the starter wire power, nothing happens. It does not crank at all. Is there maybe 2 different wires that require 12 volts while starting. I have power going to ignition 1 as well as ignition 2, but even with the key turned I can't get it to crank.
Posted By: nick6685
Date Posted: May 25, 2010 at 6:24 PM
I have a 2004 Chevy trailblazer. I installed an Autopage C3rs6652w, but I could not get the remote start to work. I installed the GMDL-BP unit for and the locks and everything else works fine. The weird thing is that even if I turn the key to the "on" position and give the starter wire power, nothing happens. It does not crank at all. Is there maybe 2 different wires that require 12 volts while starting. I have power going to ignition 1 as well as ignition 2, but even with the key turned I can't get it to crank.
Posted By: blanx218
Date Posted: May 25, 2010 at 11:43 PM
did you program the GMDLBP? there are 2 different programming steps. the first is for the locks and the 2nd step programs the module for the Passlock2 bypass
Posted By: nick6685
Date Posted: May 26, 2010 at 11:46 AM
All I did was program the way it said on the manual. with the key out. The light is solid then start the car and the light will go out indicating it was programmed.
|