issue with autopage rs1000 unlock mode

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121878
Printed Date: May 08, 2024 at 6:00 PM

Topic: issue with autopage rs1000 unlock mode

Posted By: ckthepilot
Subject: issue with autopage rs1000 unlock mode
Date Posted: May 17, 2010 at 9:43 PM

I have recently been experiencing difficulties unlocking my car doors with the rs1000 remote. No problems with locking though. Remote is fully charged just to make sure it's not a battery problem. What is causing this? This just happened recently after having the remote start installed for 2 years now. I can still use my factory (oem) car remote to unlock/lock my car with no problems so I'm not quite sure what's going on. I sometimes forget that I armed the car with the autopage remote and then use the oem remote to disarm the car and what do you know... the car alarm is triggered :/

Anyone have any suggestions on how to fix this problem with the autopage rs1000 remote start system?

Replies:

Posted By: ckthepilot
Date Posted: May 17, 2010 at 9:47 PM

Right now I'm just using the factory remote until I find a solution for the autopage remote.

Posted By: mikvot
Date Posted: May 17, 2010 at 9:52 PM

WHAT KIND OF CAR?

Posted By: ckthepilot
Date Posted: May 17, 2010 at 11:11 PM

mikvot wrote:

WHAT KIND OF CAR?

2007 Nissan 350z

Posted By: ckthepilot
Date Posted: May 18, 2010 at 6:19 PM

anyone who can offer help? :)

Posted By: mikvot
Date Posted: May 18, 2010 at 11:32 PM

Yes....how is the Autopage interfaced with the door locks in the car? Was a module used, or were wires inserted into empty pins at the bcm? The easiest way to find out what's goin on, would be to a multimeter to the unlock wire of the Autopage unit. This will tell if the the system is even sending an unlock pulse. Chances are, it's something simple....like setting your system to double pulse...