intellstart 4 car not turning off after
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121937
Printed Date: May 14, 2024 at 7:39 AM
Topic: intellstart 4 car not turning off after
Posted By: magic_mike
Subject: intellstart 4 car not turning off after
Date Posted: May 21, 2010 at 6:32 AM
I have got the intellistart4, and when I get out of my car with it running and arm the car, it doesnt turn off for some reason, it was also fitted b4 I got the car, any help will be great full, I only have the 4 Button remote
Replies:
Posted By: howie ll
Date Posted: May 21, 2010 at 9:03 AM
Where are you?
Posted By: tedmond
Date Posted: May 21, 2010 at 9:17 AM
let howie fix this one, if youre within reach of course ahah. clifford is in his DNA, he knows those systems inside out. ------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: howie ll
Date Posted: May 21, 2010 at 10:48 AM
Are you sure this isn't an auto or they've (illegally) wired it as an auto and you're pressing the * button to activate R/S rather than the manual transmission enable.
Posted By: magic_mike
Date Posted: May 21, 2010 at 1:41 PM
Hi, I am in North Wales place called Llandudno. the way I activate it is: start the car press * remove key exit car arm car and the engine keeps running, I am sure it is ment to stop cut off at this point thanks for the fast reply :)
Posted By: howie ll
Date Posted: May 21, 2010 at 4:06 PM
OK you're activating the remote start itself rather than the remote start enable. Bet you can press the * at any time and the car will start! Very naughty if it's a manual.
What alarm is it? Concept 300?
Posted By: magic_mike
Date Posted: May 21, 2010 at 4:16 PM
What my car does is I can leave it running if I pop in to the shop and take the key with me think its called (stopshop) or something. My car doesn't start off the key, I have not been able to do this, it doesn't cut out the engin when I have activated it, the rmp drops ever so slightly, but continues to run. If I have the car running and push * button, I can remove the key and it continues to run, and if I am naughty and put it in 1st gear to stall it to see if it stays stalled, it starts up about 3 seconds after. I have got the Clifford I-950 + Intellistart 4 its on a manual 5 speed.
Posted By: howie ll
Date Posted: May 22, 2010 at 7:39 AM
Do you have owners manual or the valet code. If not the first PM me with your email address and I'll send them to you, if not the second, contact the previous owner.
Posted By: magic_mike
Date Posted: May 23, 2010 at 7:04 PM
I have got both manuals the 950 and the intellistar4, the code is on the back of the 950, I have recently ordered a 5 button remote now, so I hope that this will help. I should get it on tuesday if all goes well. I got the car from a garage so previouse owner is out of the window lol. I tired to re-set it through the valet code and now my alarm sequense has changed. I think I might need the Cliffnet wizars cd and cable now, I seem to of made things worse, typical, and sugestions of the cliffnet wizard software? Thanks
Posted By: howie ll
Date Posted: May 24, 2010 at 12:28 PM
Yes don't use the Wiz, you're safer doing it manually.
Posted By: magic_mike
Date Posted: June 12, 2010 at 11:11 AM
Ok finaly sorted it, I needed the 5 button remote, but now I have changed the tone of my alarm, I have been told I need to plug it in to a laptop now to get the setingd back, does anyone know of one second hand?
thanks
|