Print Page | Close Window

autopage c3-rs-665, c3-rs-730

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121947
Printed Date: May 09, 2024 at 1:34 AM


Topic: autopage c3-rs-665, c3-rs-730

Posted By: dustintucker2
Subject: autopage c3-rs-665, c3-rs-730
Date Posted: May 21, 2010 at 11:59 PM

In the process of installing in my car but i need the install manual... any help would be greatly appreciated.

-------------
Dtuck



Replies:

Posted By: topperz7
Date Posted: May 22, 2010 at 5:34 PM

I install Autopage alarms. I always give the install and owners manual to the customer. I could probably answer any question you have as far as what each wire color does





Posted By: dustintucker2
Date Posted: May 22, 2010 at 5:51 PM
Well I'm still waiting on it to come in the mail and I'm assuming it does not come with install manual as most of them do not. When i get it i may give you a call for help thanks!

-------------
Dtuck




Posted By: mikvot
Date Posted: May 22, 2010 at 10:43 PM
If the unit does not come with an install manual, then you are not buying it from a reputable place or are buying a refurbished unit. I have not seen an Autopage unit come without an install manual. This is the same for most companies, although some will provide only a shortcut manual, which prevents people, that shouldn't be installing, from doing just that.




Posted By: dustintucker2
Date Posted: May 23, 2010 at 11:15 PM
Oh ok... i saw somewhere online where it said they did not come with one.. and it's a new system and i have not gotten it yet so i'm not sure i'm just trying to cover my behind.. and i have done quite a bit of electronic installations in cars and if i think i'm in over my head i'll take it to a pro... thanks for all the help

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 24, 2010 at 12:08 AM
also... if i have factory door latch sensors already is there a way to tie those in to the sensor on the brain of the alarm?

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 24, 2010 at 12:11 AM
also that includes the trunk and the hood

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 24, 2010 at 2:38 PM
Update... Have decided to order the AUTOPAGEŽ C3-RS-730 instead. It is on it's way and should be here by friday or monday. Above question still remain un answered.

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 24, 2010 at 8:30 PM
Anyone got the install manual for the autopage c3-rs-730

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 24, 2010 at 10:27 PM
also is there any way to wire the led warning light into windshield wiper lights?.. like the fluid shooters?

-------------
Dtuck




Posted By: mikvot
Date Posted: May 24, 2010 at 10:34 PM
It's hard to answer such a vague question. The alarm itself can be set up trigger however you want, but since you have not posted what kind of vehicle you are installing it into, it's hard to tell you if the vehicle is equipped with factory sensors such as...hood or trunk. I will gladly help you....but you have to help me ,help you..Year,make,and model of vehicle.




Posted By: dustintucker2
Date Posted: May 24, 2010 at 11:13 PM
Oh yes of course... i have a 1992 acura vigor it has a stock alarm system with the door latch stuff i was going to use the autopage's factory alarm arm and disarm outputs for that. sorry i totally forgot to put the make and model of my car.

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 24, 2010 at 11:41 PM
oh ok... so they are all the doors themselves are all on one wire... but how would i go about hooking that to the alarm brain?

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 26, 2010 at 2:07 AM
Oh, also... can the autopage power window module be used on just one auxilary channel?

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 26, 2010 at 2:00 PM
can the led indicator output from the alarm be used on any 12 volt led light... windshield wiper lights for instance?

-------------
Dtuck




Posted By: dustintucker2
Date Posted: May 26, 2010 at 5:36 PM
I'm fixing to install the autopage c3-RS-730 and i was wondering how hard it would be to go back and add the window module later... or would it just make it completely easier to wait untilli get the window module to put the whole thing in?... any help is great.. thanks!

-------------
Dtuck





Print Page | Close Window