viper 5301 vs 5701

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121955
Printed Date: May 12, 2025 at 6:19 PM

Topic: viper 5301 vs 5701

Posted By: eeae6000
Subject: viper 5301 vs 5701
Date Posted: May 22, 2010 at 3:18 PM

right now i have the 5301 but have to send it back due to bad brain, if i upgrade to the 5701, can i use my exisiting harness from the 5301 and directly plug it into the 5701 or are they different

and besides it being a alarm, what other features does the 5701

and if i do keep the 5301, can i hook up sensors such as tilt and glass to it or is that only for the 5701 and up?

Replies:

Posted By: smokeman1
Date Posted: May 22, 2010 at 9:04 PM

Not really. The H1, H2, and H3 heavy Gauge Harness are different. H1 harness has H1/3 as the +siren output, The H2 Harness on the 5701 is a 8 pin connector vs the 5301 is a 7 pin connector, and the H3 Heavy Gauge harness on the 5701 is a 10 pin connector vs the 5301 is a 8 pin connector.

I don't believe the 5301 has any ports to connect any sensors.

I have two cars with the 5301, and a work van with the 5701 in it. They are pretty much the same as far as features, the 5701 is an alarm/Remote start/Keyless Entry, The 5301 is a Remote Start/Keyless Entry only. No alarm. They program the same. I use one remote to operate both my work van and my car.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: eeae6000
Date Posted: May 23, 2010 at 12:27 AM

ok that sucks, that means i have to swap them out, sucks

thank you