viper 5902, door locks acting weird

Installed a Viper 5902 in a 2010 Mercury Milan (same wiring as the Fusion). I have two questions regarding this install;

1.) What is everyone using for the door triggers? I was told GREEN/ purple (-) but that only works for the drivers door...

2.) The door locks were working great. You arm the car and the locks would lock. You disarmed and they would unlock. The other day I was going through the menu in the Bitwriter and now they are acting weird, you have to click the unlock button 3 times before the door locks unlock. The first time you press the disarm button nothing happens. The second time you press it the trunk opens (never did that before as button 4 was for the trunk) and the third time that you press the disarm button THEN it unlocks the doors... I did NOT change any setting having to do with the locks (because they were working fine) which is why this is throwing me off. What settings should I be looking at to fix this?

THANKS!

Not sure about your locking issues but as for for door triggers on newer fords, You can get all door triggers as positive with diodes to isolate them from eachother. They throw enough positive to trip a door trigger.

-------------
Ryan Edwards
MECP Certified Installer

THANKS guys! Found the Gray/Violet inside the console :)

If anyone else knows why the door locks are working wrongly, please post....

Thanks!

Reset your remotes with the Bitwriter.