remote replacement
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122131
Printed Date: July 21, 2025 at 5:08 PM
Topic: remote replacement
Posted By: shadow14us
Subject: remote replacement
Date Posted: June 03, 2010 at 8:19 PM
Recently purchased two new remotes for my K9 Classic, but I am having difficulty in getting them installed. Tried to follow the instruction thatcame with the remotes, but nothing happens. Press the necessary buttons, but zero, nada, zilch. Any suggestions?
-------------
The Shadow Knows
Replies:
Posted By: topinstaller200
Date Posted: June 07, 2010 at 11:58 PM
gotta get the alarm into programming mode. check to make sure your valet switch is working/ plugged in
Posted By: shadow14us
Date Posted: June 08, 2010 at 1:53 PM
OK, hate to sound dumb, but where is the "Valet" switch located? This alarm system was already installed when I purchased the vehicle from the original owner, and I don't have any paperwork on this unit.
-------------
The Shadow Knows
Posted By: r.loring
Date Posted: June 11, 2010 at 6:43 PM
should find what youre looking for here:
k9 classic manual------------- I will not Fear. Fear is the mind killer.
Posted By: r.loring
Date Posted: June 11, 2010 at 6:51 PM
had to do research on this recently.
the valet switch is usually on just below the left side of the steering wheel or further underneath the right side. it will either be a toggle switch or a tiny spring button.
-------------
I will not Fear. Fear is the mind killer.
|