clifford 50.7x powering up problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122166
Printed Date: May 17, 2024 at 10:40 AM
Topic: clifford 50.7x powering up problem
Posted By: frankie345
Subject: clifford 50.7x powering up problem
Date Posted: June 05, 2010 at 12:18 PM
I have a Clifford 50.7x which has been hooked up with basic minimum connections on a test workbench but the control center led has not lighted up. The wires plugged to unit are constant 12v red, ground black, neutral safety in on position, and the control center. I also tried hooking the remote start pink wire to a 12 v source for ignition 1 input but led did not power up. Am I missing any desired inputs before I can power up the unit? Thanks
Replies:
Posted By: tedmond
Date Posted: June 05, 2010 at 6:59 PM
this unit has 3 positive inputs 2 on the main harness and one on a larger harness.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: frankie345
Date Posted: June 05, 2010 at 8:03 PM
Ignition input pink on larger harness is connected to 12v source. Door input green and red wire on main harness are connected to 12 v source as well. The control center led has still not lighted up. Black wire is connected to ground.
Posted By: cpgoose
Date Posted: June 07, 2010 at 3:13 PM
Are you missing any inline fuses, or are any of the fuses blown? Just an idea.
|