Print Page | Close Window

Avital 3200 Help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12224
Printed Date: August 14, 2025 at 5:10 AM


Topic: Avital 3200 Help

Posted By: n8120b
Subject: Avital 3200 Help
Date Posted: April 14, 2003 at 10:40 PM

hey there,

I am installing a Avital 3200 on a 2002 dodge neon. The unit starts my car ok  most of the time but about 25% of the time the starter will crank and then the engine stops.  I understand the maybe the unit has trouble reading the tach wire correctly.  I tryed to make it  "learn" the tach wire as in the instructions but it doesnt learn it.  

What I want to try is to make the unit read voltage sense instead of the tach wire, I am trying to reprogram it as in the instructions but the unit does not want to reprogram, in fact I cant even get past the first step.   The LED doesnt lite up to start up the programing process.

Could my wiring be wrong, because I really dont know anymore.

Please help,

Mac




Replies:

Posted By: Velocity Motors
Date Posted: April 14, 2003 at 11:33 PM
What wire did you use for the tach ? You should have used the BLACK/ GRAY wire at the coil.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window