i got a clifford ace 4000 alarm and a 98 toyota avalon. i have a problem with the alarm. my parking light does not blink or even go on with upon arming or disarming of the alarm. another is when i am driving, alarm arms itself led start blinking etc. another is when i disable it to get into my car, not even opening the doors yet, the indicator is on for the doors. can anyone help.
Did you do the installation or was it a shop that did it ? I can give you the wiring diagram for this vehicle and you can compare the wires on the car that were used to the diagram:
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white or wht/red |+ |ignition harness |
| STARTER|red |+ |ignition harness |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| SECOND IGNITION|black |+ |ignition harness |
| ACCESSORY|blue |+ |ignition harness |
| POWER LOCK|blue/white *1 |- |either kick *1 |
| POWER UNLOCK|blue / YELLOW |- |passenger kick |
| PARKING LIGHTS +|green | |dkp at top white plug |
| PARKING LIGHTS -|GREEN/ red | |integration relay *2 |
| HEADLIGHTS|RED / black |- |steering column |
| DOOR TRIGGER|RED / white (1 of 2) |- |dkp 2nd plug in on top |
| TRUNK/HATCH PIN|RED / white |- |left side of trunk |
| HOOD PIN|BLACK/ 2 sil dots |- |pkp 2nd plug from top |
|TRNK/HTCH RELEASE|WHITE/ blue |- |trunk release switch |
| FCTRY ALARM ARM|arms with lock | | |
|FCTRY ALRM DISARM|disarms with unlock | | |
| TACHOMETER|BLACK/ silver dots | |rear of cluster |
| BRAKE WIRE|GREEN / WHITE |+ |4 pin wht plug L brake |
| HORN TRIGGER|GREEN/ black |- |at steering column |
| WIPERS|blue/black |+ |left of steering col. |
| LF WINDOW UP/DN|green - red |A |in drivers door |
| RF WINDOW UP/DN|grn/wht - RED / blu |A |in drivers door or dkp |
| LR WINDOW UP/DN|grn/yel - RED / yel |A |in drivers door or dkp |
| RR WINDOW UP/DN|grn/blk - RED / blk |A |in drivers door or dkp |
Notes:
NOTE: Some models have an immobilizer system that needs to be bypassed during remote start. Use DEI module 555F or 555U to bypass. *1 on cars without factory security system use GREEN/ orange(-) to lock. *2 the integration relay is located at the bottom of the fuse box.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA