NISSAN PATHFINDER INSTAL PROBLEM

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12230
Printed Date: August 16, 2025 at 8:25 PM

Topic: NISSAN PATHFINDER INSTAL PROBLEM

Posted By: bandit
Subject: NISSAN PATHFINDER INSTAL PROBLEM
Date Posted: April 15, 2003 at 3:38 AM

Hi, i am having a Hunstmsan car alarm installed in a 2000 model ST Nissan Pathfinder. There is one problem and that is that when activating the alarm all doors except for the drivers door are locked, or unlocked when disarming. Is there a way of making the alarm lock all doors. Any help appreciated.

bandit

Replies:

Posted By: draasch
Date Posted: April 15, 2003 at 11:36 PM

when you use the key to lock/unlock the door on the drivers side, do all the locks operate??

if so you need to add a motor to the drivers door. and then tie the alarm into the the new motor. when the alarm operates the new motor it will in return lock and unlock all the doors

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: Velocity Motors
Date Posted: April 17, 2003 at 12:01 AM

Here are the correct wires for the Pathfinder, please double check these wires and post your results:

*1 Keyless entry module is located under drivers side of dash.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: bandit
Date Posted: April 17, 2003 at 12:59 AM

Thanks for the help guys. We found the problem. The Pathfinder doesn't use an actuator in the drivers side door, so we installed one and then ran wires from the rear door to it. All works well. Thanks for the help.

Bandit

Print Page | Close Window