dei 456l wiring and programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122334
Printed Date: May 02, 2024 at 10:12 AM

Topic: dei 456l wiring and programming

Posted By: dyess5
Subject: dei 456l wiring and programming
Date Posted: June 17, 2010 at 6:57 PM

How do you wire this little box up?

I have a used DEI-456L and I can not figure out how to wire it up and program it. I can only find information that say it is easier than relays, I guess if you have the wiring and instructions on it. I have the truck wiring but I need the 456L wiring.

I understand the bascis like power,ground, and door lock wire but there is an extra wire that has a conector on it and I do not know where it goes or if it is needed to make the unit work.

Also I keep reading the relays are needed to stop the feedback from the locks. Would it not be easier and quicker to use diodes?

Replies:

Posted By: dyess5
Date Posted: June 17, 2010 at 6:59 PM

2005 Dodge Ram but I need the info for the box not the truck.

Posted By: tedmond
Date Posted: June 17, 2010 at 8:02 PM

here you go.

https://www.xpresskit.com/DocumentDownload.aspx?documentid=4728&productid=30&firmwareid=1487

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: dyess5
Date Posted: June 17, 2010 at 10:16 PM

I have no idea where you found that but, Thank You

Posted By: tedmond
Date Posted: June 18, 2010 at 5:48 AM

no prob.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert