mazda 3 2010 clutch bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122369
Printed Date: May 04, 2024 at 7:50 AM

Topic: mazda 3 2010 clutch bypass

Posted By: jobber29
Subject: mazda 3 2010 clutch bypass
Date Posted: June 21, 2010 at 9:07 AM

Anyone know how to bypass the clutch for a 2010 mazda 3?

Replies:

Posted By: tedmond
Date Posted: June 21, 2010 at 11:16 AM

you have a positive clutch so you will need to take a relay,

85 - 2nd neg start from unis
86 - constant 12v
87 - constant 12v
30 - clutch wire PURPLE (+) @ clutch switch.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: jobber29
Date Posted: June 21, 2010 at 11:36 AM

Ok thank you very much for your help! posted_image

Posted By: jobber29
Date Posted: June 21, 2010 at 12:07 PM

Sorry for the question but do I need a SPDT or a SPST relay?

Posted By: jobber29
Date Posted: June 21, 2010 at 1:30 PM

Ok, I found the answer, I need a single pole, single throw (SPST)

Posted By: kreg357
Date Posted: June 21, 2010 at 1:53 PM

Either will work. Most common are the SPDT. Pin 87a is not used. Wire up as per Ted's post above.

-------------
Soldering is fun!

Posted By: jobber29
Date Posted: June 21, 2010 at 8:30 PM

Can I find this wire somewhere else because i'm not able to go solder at this place. Also can I find a constant 12v wire in the driver kick panel?

Posted By: tedmond
Date Posted: June 21, 2010 at 9:18 PM

you should have enough slack when unplugged to solder the wire to. you can get the constant 12v at the fuse box OR the ignition harness.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window