remote starter how to

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122422
Printed Date: May 21, 2024 at 7:36 PM

Topic: remote starter how to

Posted By: crisafi75
Subject: remote starter how to
Date Posted: June 24, 2010 at 9:29 PM

2003 gmc yukon 5.3 v8 4x4 slt

I am in need of the electrical wiring diagram for my truck.I bought the Viper 5301 remote start and bypass module. When I install the remote start does the Factory Alarm work with the remote starters "remote?" to Arm/Disarm the vehicle?

If anyone has a diagram of the Viper 5301 and the wiring diagram used for installing remote start in my truck that would be great.

I thank you any help is appreciated

-------------
Not here for a long time,im here for a good time!

Replies:

Posted By: roadshop570
Date Posted: June 27, 2010 at 4:12 PM

https://www.the12volt.com/installbay/forum_posts.asp~TID~28666 This will get you started and if you have the right module it should intergrate the factory alarm, what is your bypass model#?

-------------
Chadillac

Posted By: crisafi75
Date Posted: June 28, 2010 at 9:51 AM

roadshop570 wrote:

https://www.the12volt.com/installbay/forum_posts.asp~TID~28666 This will get you started and if you have the right module it should intergrate the factory alarm, what is your bypass model#?

thanks,the bypass is the "xpresskit Xko1 with firmware AMDL"

-------------
Not here for a long time,im here for a good time!