bypassing factory alarm on 2000 dodge

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122491
Printed Date: May 17, 2024 at 2:26 AM

Topic: bypassing factory alarm on 2000 dodge

Posted By: muzzy73
Subject: bypassing factory alarm on 2000 dodge
Date Posted: June 30, 2010 at 4:59 PM

I have a 2000 dodge dakota. I installed an aftermarket alarm several months ago and have had no problems the other day my factory alarm armed and i cant get it to disarm. Any ideas on how to bypass the factory alarm

-------------
DW Hefner

Replies:

Posted By: muzzy73
Date Posted: June 30, 2010 at 5:02 PM

or is there a way to reset it i didnt recieve the remote for the keyless entry when i bought the truck but the alarm supposed to disarm when the key is put in and turned to unlock the truck

-------------
DW Hefner

Posted By: brent w
Date Posted: July 01, 2010 at 2:27 PM

Ok what i would do is test the Factory Alarm Disarm while using the key to unlock the door.

FACTORY ALARM DISARM

BLACK/ ORANGE (-)

IN EITHER KICK PANEL

Find the wire in the kick panel and take a DMM set to 12v DC and get the red lead on a 12v constant(use a fuse or the 12v constant wire at the ignition harness) then probe the BLACK/ Orange wire while unlocking the door. If the DMM doesnt say 12v when you are unlocking, i would say the switch has gone bad.

One of the more senior members might be able to add to this.

Posted By: muzzy73
Date Posted: July 01, 2010 at 8:39 PM

Thank you. I will try that

-------------
DW Hefner