ok this is my first time installing a keyless entry, i have a 98 honda accord and i have read the alarm wiring info for my car and the 211hv system has 2 unlock and 2 lock wires and i am confused anyone mind giving me what I need to connect to make the keyless entry work,with the horn honl, domelight supervision, and parking lights flash please.
thanks for the help in advance, hopefully i can get some help.
| Constant 12V+ |
White |
Passenger's Side Fuse Panel or Ignition Harness |
| Starter |
BLACK/ White |
Near Heater/AC Fan Motor |
| Ignition |
BLACK / YELLOW |
Ignition Switch Harness |
| Ignition 2 |
WHITE/ Black |
Ignition Switch Harness (ABS Light) |
| Accessory |
Yellow |
Ignition Switch Harness |
| Tach |
Blue |
Distributor |
| Brake Switch |
GREEN / WHITE |
Brake Switch |
| Trunk Release |
WHITE/ Red (+) |
Driver's Side Grey Molex |
| Trunk Pin |
Orange (-) |
Driver's Kick GREY Molex Connector |
| Parking Lights |
RED / Black |
Fuse Panel |
| Head Lamp |
Blue |
Left of Column Blue Connector |
| Hood Pin |
Yellow (-) |
Passenger's Side Green Connector |
| Factory Disarm |
Blue |
Driver's Door |
| Door Trigger |
BLACK/ White (-) |
Passenger's Side Fuse Panel |
| Door Lock |
BLACK/ Blue or BLACK/ Red |
Panel Passenger's Side near Door |
| Door Unlock |
Orange (-) |
|
| Horn Wire |
Light GREEN/ Blue |
Passenger's Side Fuse Panel |
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5