hood/trunk trigger connection
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122730
Printed Date: May 21, 2024 at 2:16 PM
Topic: hood/trunk trigger connection
Posted By: govtec
Subject: hood/trunk trigger connection
Date Posted: July 18, 2010 at 9:59 AM
Hi,
I'm in the middle of installing the Clifford Arrow 5.1 alarm system. The car is 1996 Toyota Camry V6 Station Wagon. I can't seem to find the wire for the hood/trunk trigger in the steering column. The wire supplied by the control harness is very short. So I would assume the connecting wire is very close. Thanks
Replies:
Posted By: i am an idiot
Date Posted: July 18, 2010 at 11:15 AM
 |
Trunk Trigger |
|
RED / WHITE |
|
(-) |
|
AT TRUNK LIGHT |
Posted By: govtec
Date Posted: July 18, 2010 at 12:03 PM
That's what my car wiring diagram says too but the blue wire from the control harness is only about 3 feet long. How am I suppose to carry this all the way to the trunk? I wish I could post pic but I'm not a standard member yet. I'm also having problems with connecting the parking light (direction is asking me to connect fuse holder to this along with 12 volt power and wire harness...doesn't make sense) and dome light (something about supervision relay). Thanks
Posted By: i am an idiot
Date Posted: July 18, 2010 at 12:44 PM
Do you have an auto parts store close to you? They usually sell wire.
Posted By: govtec
Date Posted: July 18, 2010 at 12:48 PM
yea, I'm running to advance auto parts store now. I'll also need hood pin and switch.
|