04 dodge ram parking lights
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122794
Printed Date: May 02, 2024 at 11:17 AM
Topic: 04 dodge ram parking lights
Posted By: xxunknownxx
Subject: 04 dodge ram parking lights
Date Posted: July 22, 2010 at 9:47 PM
I was looking at this wiring diagram for a 2004 Dodge Ram and it says I can grab the (+) parking light at the bulb. Is this possible? I already have to run a tach wire out there so its not a problem running an extra wire under the hood.
I'd rather use a (+) parking light wire rather than the (-) inside the cab because the one inside the cab requires an extra relay and resistors. This is my brother's truck and I'd rather keep the relays under the dash to a minimum.. He was extremely disappointed with the alarm system a rinky dink audio shop installed. There were relays everywhere and all of them t-tapped into the constant ignition wire....yes...t-taps
One last question. What type of solder do you guys use and does the type make a difference? I use Radioshack 60/40 rosin core solder.
Pic of the truck just for fun :)
I'd rather use a (+) parking light wire rather than the (-) inside the cab because the one inside the cab requires an extra relay and resistors. This is my brother's truck and I'd rather keep the relays under the dash to a minimum.. He was extremely disappointed with the alarm system a rinky dink audio shop installed. There were relays everywhere and all of them t-tapped into the constant ignition wire....yes...t-taps
One last question. What type of solder do you guys use and does the type make a difference? I use Radioshack 60/40 rosin core solder.
Pic of the truck just for fun :)
Replies:
Posted By: KarTuneMan
Date Posted: July 22, 2010 at 10:25 PM
Posted By: calijtee1
Date Posted: August 24, 2010 at 7:06 PM