k9 eclipse wont transmit to pager
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122818
Printed Date: May 09, 2024 at 10:22 PM
Topic: k9 eclipse wont transmit to pager
Posted By: mertin
Subject: k9 eclipse wont transmit to pager
Date Posted: July 24, 2010 at 7:19 PM
I have a k9 Eclipse (on the bench - not installed) that wont respond to the remote, however the arm/disarm work.
the alarm was half installed and abandoned because of time constraints, it was removed and i am now wanting to install it again.
alarm functions work.. arm/disarm/siren sounds/ dual zone sensor works as it should. have not tested door lock relays yet.
both remotes are brand new and both are confirmed programed to the unit so I don't think its them.
had the unit apart and tested continuity on the wires from the antenna mod and the brain and it all checks out.
just for some reason wont communicate back to the remotes.
anyone have any thoughts on this?
Replies:
Posted By: mertin
Date Posted: August 01, 2010 at 12:12 PM
bump
no suggestions to test anyone?
experience?
|