Clifford rs2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12283
Printed Date: August 21, 2025 at 3:09 PM

Topic: Clifford rs2

Posted By: 1200mk
Subject: Clifford rs2
Date Posted: April 16, 2003 at 2:55 PM

Hi, I just got hooked up with this alarm for like 100 bucks new. I was wondering how much a shop will charge for it to go into a 2003 crv? And will it cost extra for dome light supervision, and remote door (the car already has power locks)

Thanks.

Replies:

Posted By: ViperATC5
Date Posted: April 16, 2003 at 8:29 PM

given that the RS2 is an alarm and remote start unit, heres a breakdown of what you're looking at to install this unit

General Labor $120-180
555U Bypass Module $40
Extra Relays (2) $20
Mercury Switch $15
Misc Wire, Loom & Materials $20

Total - $215-$265
Some shops charge extra to install extras such as power hatch release. Also, you will need a key that you will lose in the install, unless the shop carries 555H bypass modules

Posted By: 1200mk
Date Posted: April 16, 2003 at 11:23 PM

What is the extra key for? and is there any way to avoid it? thanks

Posted By: Scott35
Date Posted: April 17, 2003 at 2:31 PM

The 555u you have to have an extra key for, because of the transponder chip. The 555h doesn't need the extra key.

-------------
Tacomacrew

Posted By: 1200mk
Date Posted: April 17, 2003 at 2:39 PM

so why would everyone use the 555u if the 555h is available? Those keys are expensive for copies. And you guys know any cheap places to get the 555h? thanks

Print Page | Close Window