door open on remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122947
Printed Date: July 07, 2025 at 7:36 PM
Topic: door open on remote
Posted By: matthewjon
Subject: door open on remote
Date Posted: August 02, 2010 at 6:14 PM
Hi,
After arming the Viper 5901, my remote tells me "door open." Went around and made sure the doors were closed. Tried it again, same thing.
So I roll the windows down, and arm the alarm. I unlock each door and I find the alarm isnt picking up when either front door is opened. The rear doors trigger the alarm.
The factory alarm goes off when I open the front drivers door, but not when I open the front passenger door.
Viper 5901 alarm with an Idatalink bypass. Ive had it installed for awhile now, with zero issues. It just started doing this today.
I have it soldered W2W. Everything is heat shrinked or taped up good. I checked the door trigger wire going to the bypass and it seems to be a solid connection.
Think the bypass is the issue? Or is there something that I overlooked?
THanks, Matt
Replies:
Posted By: matthewjon
Date Posted: August 02, 2010 at 6:15 PM
FOrgot.
2007 GMC Sierra CLassic...old body style
Posted By: matthewjon
Date Posted: August 02, 2010 at 11:51 PM
Everything else works perfect, the shock sensor, locks, R/S.
Has to be a reason why the alarm isnt acknowledging the front doors. THe domelight comes on when you open the front doors.
The siren also chirps once after the arming chirps, telling me that a door is open.
Anyone?
Posted By: matthewjon
Date Posted: August 03, 2010 at 5:59 PM
No idea why the front doors aren't being picked up?
Posted By: dasbogie
Date Posted: August 03, 2010 at 6:19 PM
have you tried reprogramming the idatalink piece?
-------------
Advanced
Posted By: matthewjon
Date Posted: August 03, 2010 at 8:53 PM
dasbogie wrote:
have you tried reprogramming the idatalink piece?
Good heads up! Reprogrammed the bypass and all is well..for now. Any idea why that happened? No work has been done on the truck, so it isnt like the battery was disconnected.
Anyways, thanks!
|