alarm brand

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123019
Printed Date: May 13, 2025 at 1:20 PM

Topic: alarm brand

Posted By: Elizstoy
Subject: alarm brand
Date Posted: August 07, 2010 at 9:23 PM

I just bought a BMW with an alarm installed. On the brain all it says is TELECOM? I searched and really found nothing. The FCC ID CODE on the remote fob says LQLKNJ2NR when i looked it up came back to K & J Trading Inc 5970 Santa Fe Ave. Huntington Park CA 90255. But i think thats just for the remote. The remote has what looks like a GB logo or CB logo stamped on it. Any help will be great thanks. Here are some pics of the brain and a pin layout connection.Any help to identify this brand would be helpful. Also the pin connection what are they the UK? LK? and so on Thanks.

posted_image

-------------

Replies:

Posted By: howie ll
Date Posted: August 08, 2010 at 2:57 AM

Model and year of car?
What are you trying to achieve?
Especially if you can't work out what lock and unlock are.
I'm sure if you PM Chris Luongo, he was involved in something like this a year ago.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: Elizstoy
Date Posted: August 08, 2010 at 3:11 AM

Thanks for the reply. The alarm was installed on a 1988 BMW when i bought it. As far as trying to achieve? really i would lie to now more or less what this alarm can do inside the brain are some toggle switches? and the bottom two buttons on the fob tried playing with them but nothing one button has a pic of a key and the other an astrik. Again Thanks Howie II probably will pm Chris Luongo. If i get no other replies.

-------------

Posted By: tedmond
Date Posted: August 08, 2010 at 11:13 PM

some of those wires you can figure out by the printout. A handfull of them are obvious. and with a DMM you can alwyas verify it.

i think its best if you just replacedit it something newer so you dont run into problems.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: Elizstoy
Date Posted: October 22, 2010 at 9:16 AM

bump

-------------

Posted By: howie ll
Date Posted: October 22, 2010 at 1:16 PM

Why the bump? posted_image

Tedmund's reply is possibly the best you will get.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: howie ll
Date Posted: October 22, 2010 at 1:18 PM

LK and UK must stand for lock and unlock.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: Elizstoy
Date Posted: October 23, 2010 at 12:22 AM

You never know. But thanks

-------------