remote start 09 jeep wrangler
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123080
Printed Date: April 19, 2024 at 10:27 PM
Topic: remote start 09 jeep wrangler
Posted By: Ynot80
Subject: remote start 09 jeep wrangler
Date Posted: August 11, 2010 at 1:18 PM
I got a 09 Wrangler Im trying to do a remote start on here at work . It doesnt have factory keyless and Im assuming it doesnt have any kind of chip in the key . It has a plain metal key with a gray head on it . I have a Canmax 400 bypass and a Auto Mate AM6.2 remote start for it . This is the first time Ive worked with this combo . After reviewing all the installation instructions Im a bit confused . Since this vehicle doesnt have the normal kind of ignition wires do I need to wire the main harness on the AM6.2 with the heavy gauge wires ? Im just not understanding how the vehicle will remote start using this bypass . It looks like theres a couple wires in the vehicle that it connects too and then every other connection are wires right from the remote start .
Replies:
Posted By: dasbogie
Date Posted: August 11, 2010 at 2:57 PM
usually grey key is a chipped key on jeep,dodge,chrysler products. After looking at the install guide for the canmax it appears the only connections to the vehicle from the remote starter you need to make is power,ground, parking lights, and that diode on the r/s igntion wire to the vehicle ignition wire. Everything thing else is from the canmax to the vehicle.
-------------
Advanced
|