ford gold alarm glass/shock sensor?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123084
Printed Date: May 06, 2024 at 9:06 AM
Topic: ford gold alarm glass/shock sensor?
Posted By: tikt b8
Subject: ford gold alarm glass/shock sensor?
Date Posted: August 11, 2010 at 3:42 PM
I am installing an OEM Ford Gold alarm in my 07 Expedition and I want to add a perimeter/shock and window sensor to it. Will the DEI 506 T or Code Alarm CA-GBS work on this alarm? What about the 508 D or the CA-9492 for the shock sensor? I know that the 508 D will work on OEM GM alarms but this is my first ever ford and cannot find this information. Thanks for any help.
Replies:
Posted By: lgrammer
Date Posted: August 13, 2010 at 12:03 AM
not to be a bug but i hope you got the unit free or really cheap cause the factory ford alarm system are junk. They are made by code alarm so i dont see why not but i have never hooked up an extra sensor to them
Posted By: tikt b8
Date Posted: August 29, 2010 at 3:53 PM
I got the alarm for right above cost and I am an OEM junkie for this car. I just like the functionality of OEM stuff.
But, just an fyi, but these can be incorporated into the stock alarm. My stereo shop used a relay and the hood pin to connect the 506T and it works great. The relay was used to reverse the polarity of the door trigger into a negative signal for the 506T. It works great. The other sensors (508 D, etc) can be hooked up in a parallel with the 506T as well.
|