need replacement transponder loop

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123128
Printed Date: May 15, 2025 at 9:33 PM

Topic: need replacement transponder loop

Posted By: ryanmc
Subject: need replacement transponder loop
Date Posted: August 15, 2010 at 7:13 PM

somethings wrong with my transponder loop I think a wires broke in it. if I squeeze it and play around it will work but its not reliable. are these generic? i was thinking of buying the cheapest transponder i can find to get one or does it matter what unit its for. im not to familiar with what these are made from but could i just make one? or where can i get one.
Thanks Ryan

-------------

Replies:

Posted By: tedmond
Date Posted: August 16, 2010 at 3:19 PM

they are all the same thing.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: Mark Mizenko
Date Posted: August 17, 2010 at 10:05 PM

Do you have a Viper LED? You can cut the wires off that and use them for a loop. 5 wraps for the loop should be fine.

Posted By: kgerry
Date Posted: August 19, 2010 at 3:17 PM

any length or 20-22 ga. primary wire will work....3-5 loops should do the trick....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: ryanmc
Date Posted: August 19, 2010 at 5:57 PM

sure now you tell me! i ordered a "universal" one off fleabay.although it didnt show yet, i do appreciate the feedback anyway though. thanks

Print Page | Close Window