automate am6

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123226
Printed Date: May 11, 2025 at 4:16 PM

Topic: automate am6

Posted By: tech33
Subject: automate am6
Date Posted: August 24, 2010 at 12:14 AM

bought a 2003 chevy tahoe with automate am6 preinstalled. lock/unlock works and can hit * button twice and vehicle will

stay running as programmed but will only crank over but not catch when * i pushed twice like programmed. any ideas?

Replies:

Posted By: i am an idiot
Date Posted: August 24, 2010 at 3:59 AM

Place the key in the ignition switch, do not turn the key on, just set it in the switch. Press the button twice. Does it "Catch" now?

Posted By: i am an idiot
Date Posted: August 24, 2010 at 4:02 AM

if it still does not start, turn the key to the run position, and try it again.

Posted By: tech33
Date Posted: August 24, 2010 at 8:43 PM

tried these already. somebody mentioned module for gm install maybe bad?

Print Page | Close Window