flashing just curious

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123236
Printed Date: May 12, 2024 at 9:42 AM

Topic: flashing just curious

Posted By: kgerry
Subject: flashing just curious
Date Posted: August 24, 2010 at 5:13 PM

i am looking at bringing in some Fortin modules this season... anyone know if the XKloader II will work to flash them? (since it works for the re-badged Fortin stuff...PKALL, DLPK, etc)

i am hoping not to have to buy a 3rd bootloader... 1 for Idata, 1 for Xpresskit & 1 for Fortin

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Replies:

Posted By: kreg357
Date Posted: August 24, 2010 at 5:38 PM

Tried hooking up a Fortin CAN-SL2 to a XKLoader2 and running VIP / Optimax. Just says "Unit not connected". (Works fine with PKALL connected.)

Downloaded the Fortin Flash Link Updater program. With the XKLoader cable still attached, the program opens but just shows same message, "Unit not connected".

I believe you must have their USB Flash Link Updater module. On the brighter side, they don't seem to change their firmware as often as iDatalink does. And Tedmond swears by their stuff. posted_image

-------------
Soldering is fun!

Posted By: kgerry
Date Posted: August 24, 2010 at 5:40 PM

Ok... thanks!

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979