08 toyota sequoia factory alarm buzzer
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123261
Printed Date: July 14, 2025 at 9:10 AM
Topic: 08 toyota sequoia factory alarm buzzer
Posted By: drail24
Subject: 08 toyota sequoia factory alarm buzzer
Date Posted: August 26, 2010 at 12:40 PM
Can anyone verify some of the wiring diagram for the 2008 Toyota Sequoia. I am trying to locate the wires for the factory alarm buzzer and parking light flashing. When you lock or unlock using the factory remote, it sounds a remote buzzer and flashes the parking lights to confirm that it has locked or unlocked. I recently installed a remote start and would like to tie the lock/unlock function to the factory buzzer and parking lights so that they operate the same when using the aftermarket remote lock/unlock. I have looked at the wiring diagram listing here, and attempted to find/verify the correct wires... but still having a little trouble. Thanks.
Replies:
Posted By: ipv_zach
Date Posted: September 15, 2010 at 10:07 PM
lights (+) 18 ga. green at P.D.B. top left vertical connector
lights (+) 20 ga. Orange at bottom of light switch in steering column
-------------
alarmwizard
Posted By: ipv_zach
Date Posted: September 15, 2010 at 10:08 PM
wups 20 ga orange is negative
-------------
alarmwizard
Posted By: drail24
Date Posted: September 16, 2010 at 7:02 AM
Thanks for the info ipv_zach.
|