avital 4103 programming button

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123299
Printed Date: May 06, 2025 at 7:30 PM

Topic: avital 4103 programming button

Posted By: rmjz
Subject: avital 4103 programming button
Date Posted: August 29, 2010 at 3:54 PM

Hi just bought a used Ford Escape with Avital 4203 intsalled.

How can I find the "programming switch" and the "shutdown switch". Want to change the horn beeps and the runtime.

I have the owners guide and have downloaded the installation guide.

Do I need to hire a psychic?

:-)

Thanks,

Bob

Replies:

Posted By: kassdog
Date Posted: August 29, 2010 at 4:05 PM

The programming button is usually in the fuse box location or tied somewhere under the dash. It will have a on gray wire and one black wire going to it.

Posted By: Mark Mizenko
Date Posted: August 29, 2010 at 10:31 PM

The shutdown switch might not have been installed. It would be connected to the ground wire, and then either the Gray hoodpin wire, or the BLACK/ White neutral safety wire.

And the programming button would be plugged into the end of the control module, next to the LED, and this too may have not been installed.

Print Page | Close Window