python 991 not starting
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123351
Printed Date: May 04, 2024 at 7:25 AM
Topic: python 991 not starting
Posted By: peterfares
Subject: python 991 not starting
Date Posted: September 03, 2010 at 11:18 AM
Hello, I have a Python 991 and a 2007 Nissan Altima and I'm having issues with the Python.
At first, it was starting the car but I was having some issues with the climate control system not coming on at all. After changing a diode on a relay I installed under the hood for the starter motor, the Python no longer starts the car. I can hear the fuel pump come online, but that's it.
I have it outside of the car now, being powered off a little 12V wall plug. With my multimeter, I can see that the negative ignition wire works (on the 18 pin connector) but the negative starter (also 18 pin) doesn't and neither do the pins on the heavy gauge connector. I put my DMM with negative on the ground connected to the Python and the positive on the Positive ignition. I press the remote start button on my remote and the Python makes some clicks, but the DMM reads no voltage. Same thing with the accessory and starter outputs.
How do I fix this?
Replies:
Posted By: calijtee1
Date Posted: September 20, 2010 at 12:38 PM
might be the astroflex relay pack , but do you have all the red power wires hooked up to 12V+ ?? because you need to power all the red wires the two fat red ones and the rted whit white stripe and the small one which is for the brain
-------------
installers do it best. we got the magic hands!
|