2004 nissan maxima

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12343
Printed Date: May 28, 2024 at 2:31 PM

Topic: 2004 nissan maxima

Posted By: congoman
Subject: 2004 nissan maxima
Date Posted: April 17, 2003 at 5:32 PM

Does anyone have a wire diagram for the new 2004 Maxima? I need it for a remote start alarm, have tried searching elsewhere but no new info for that year yet!

also, do I need a transponder?

thanks

Replies:

Posted By: dbkrazy
Date Posted: April 21, 2003 at 8:18 PM

I just added a remote start to the factory keyless entry on a 2004 Nissan Maxim. Here are some of the wire colors I found.

12 volt-green-at ignition

acc-wht/blue-at ignition

ing 1-thin blk/red-at ignition

ing 2-red-at ignition

start 1-thick blk/red-at ignition

start 2-blk/yel

brake-RED / green-at brake switch

park lights-RED / blu-at dimmer

the lock wires are behind the fuse box

hope this info helps you

-------------
dbkrazy

Posted By: dbkrazy
Date Posted: April 21, 2003 at 8:19 PM

also it does have a transponder

-------------
dbkrazy

Posted By: congoman
Date Posted: April 21, 2003 at 11:55 PM

that's great thanks!

Will the 555u immobilizer from DEI work on the Maxima? if not which did you use?

also, did you use a tach wire?

thanks again

Posted By: dbkrazy
Date Posted: April 22, 2003 at 8:56 AM

the dei transponder peice will work. i used an audiovox as-tcbm. also for tach signal i just went to one of the fuel injectors. i know you can go to fuel injectors for a tach signal with the audiovox remote starts. not sure with any other brand. most you don't even need a tach anymore. they use voltage to sense when the engine is running.

-------------
dbkrazy

Print Page | Close Window