Print Page | Close Window

resistors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123442
Printed Date: May 11, 2024 at 7:11 AM


Topic: resistors

Posted By: godd dan it
Subject: resistors
Date Posted: September 10, 2010 at 4:55 AM

Going to install a remote start on a '04 Jeep Grand Cherokee. Its going to need a 1300 ohm resistor for the parking lights. I found some, but they come in 1/2 watt and 1/4 watt. Which ones do I get?

Also, it says for the disarm that it needs a 463 ohm resistor. I searched everywhere online and cant find any. Is there even such a thing?

Thanks.




Replies:

Posted By: i am an idiot
Date Posted: September 10, 2010 at 5:55 AM
1/2 or 1/4 watt will do.  It is not that critical on the resistance.  470 ohm is a common and easily located value.  It will work just fine.




Posted By: godd dan it
Date Posted: September 10, 2010 at 2:48 PM
Thanks for the help.





Print Page | Close Window